Current Sensors
LEM introduces new current transducers
Submitted by nestorb on Tue, 2007-06-05 13:47. The LA 300 series is optimised for industrial applications and the transducers are characterised for temperatures from -40°C to +85°C. The LAC 300 series is optimised for traction applications and meets the EN 50155 standard for vibration, temperature and pollution.
| »
AC current transformers have ferrite core material
Submitted by nestorb on Mon, 2006-12-18 23:41. In addition, the ferrite material provides an excellent linearity of better than 0.1 percent, even at very low levels, and the transformers offer a low phase shift of 1.5° ±1° between measured voltage and current...
| »
400 A Current Measurement Converter For Distribution Circuits
Submitted by nestorb on Mon, 2006-10-02 10:59. These new current measurement converters convert sinusoidal and non-sinusoidal currents from 30 Hz to 6 KHz into the analogue standard signals 4...20 mA or 0...5(10)V. The MCR-SL-S-100(200)(400)-U-(I)-(LP) measurement converters can be effortlessly installed at any time and with no interruption to the power supply...
| »
Compact split-core transducers
Submitted by nestorb on Tue, 2006-09-19 22:20. They offer a choice of primary current measurement ranges from 500 to 2000A, a choice of standard output types (4-20mA, 0-5V or 0-10V), a wide power supply range (20-50Vdc) and large sensing apertures for non-contact measurement (104 by 40mm busbar, in addition to a 32mm diameter cable version)...
| »
ACI Current Sensors and Switches
Submitted by ACI_sensors on Thu, 2006-08-03 10:42. www.workaci.com
| »
Probe tests battery system activated elements
Submitted by nestorb on Tue, 2006-07-25 09:03. The P845-Q test probe from Peak Test Services is a high-current device suitable for the testing of battery system activated elements, battery contacts and electrical current signal transmission.
| »
AC current transducer equipment
Submitted by nestorb on Tue, 2006-07-25 09:03. The range of RCTi ac current transducer equipment produced by Power Electronic Measurements has now been extended to include a 3ph version.
| »
400A current measurement converter has split coil
Submitted by nestorb on Sun, 2006-07-23 00:52. Current measurement converters convert sinusoidal and non-sinusoidal currents from 30Hz to 6kHz into the analogue standard signals 4-20mA or 0-5(10)V process currents up to 400A.
| »
Dual-range, automotive-qualified sensors
Submitted by nestorb on Sat, 2006-07-22 18:07. LEM has introduced a series of dual-range, automotive-qualified sensors for accurate, wide-range current measurements in vehicle battery monitoring applications.
| »
PCB-mounting transducer covers wide current ranges
Submitted by nestorb on Wed, 2006-07-19 18:07. A miniaturised PCB-mounting transducer allows measurement of currents up to 100A RMS.
| »
