Thermocouples
Pacific Sensor Technologies K type thermocouple industrial temperature sensors
Submitted by Don on Fri, 2008-02-01 10:55. The Pacific Sensor Technologies PST-D3100K industrial thermocouple temperature sensor is a 3mm x 100mm Insulated Stainless Steel probe complete with spring strain relief, 2 metres of steel braided cable and lug for easy connection.
| »
Pacific Sensor Technologies K type industrial temperature sensors
Submitted by Don on Fri, 2008-02-01 10:53. The Pacific Sensor Technologies PST-BCK3 industrial K type temperature sensor is a Plastics industry type thermocouple complete with spring, clamp, bayonet cap and stainless steel (1 7/16" long). 3 Meters of steel braided cable
| »
Pacific Sensor Technologies J type industrial temperature sensors
Submitted by Don on Fri, 2008-02-01 10:51. The Pacific Sensor Technologies PST-BCK3 J type industrial temperature sensor is part of larger economical range of temperature sensors including J, K type and RTD
| »
Pacific Sensor Technologies K type thermocouple industrial temperature sensors
Submitted by Don on Fri, 2008-02-01 10:48. The Pacific Sensor Technologies PST-D6100K industrial thermocouple temperature sensor is a 6mm x 100mm Insulated Stainless Steel probe complete with spring strain relief, 2 metres of steel braided cable and lug for easy connection
| »
Special 6 Metre Temperature Sensors For "Green Energy" Production
Submitted by nestorb on Sun, 2007-06-03 17:09. The sensors are supplied with a steel protective tube and an interchangeable ceramic inner tube and are used to monitor temperatures of around 1200° - 1300° C in two boilers as part of a new flux firing system. They conform to standard class 2 according to IEC 584 thermocouple type N. The sensor is mounted through the top of the furnace to a depth of approximately 700 mm.
| »
Modbus Protocol Offered with Serial Output Temperature Transmitters
Submitted by nestorb on Sat, 2007-03-03 21:45. The transmitters fit a 35 mm DIN rail and come with a three-terminal screw clamp connector for serial data I/O. RS485 or RS232 signal levels are jumper selectable and can each be associated with either the Modbus protocol or Laurel's simpler Laurel ASCII protocol. A single software command switches between the two protocols...
| »
Parker Hannifin launches high-reliability thermocouple sensor optimized for high-purity processing applications
Submitted by nestorb on Wed, 2006-11-29 07:31. * design targets non-stop use in semiconductor, biopharm and similar applications
* fitting-style packaging is optimized for speedy installation and maintenance
| »
* fitting-style packaging is optimized for speedy installation and maintenance
Wireless Thermocouple Temperature Transmitter - OM-CP-RFTC4000A
Submitted by nestorb on Fri, 2006-10-27 21:20. When enabled, the wireless transmitter will transmit readings back to the host computer where the data can be analyzed in real time. For added security the readings are logged to the device memory. The convenient slide switch allows the transmitter to be turned On/Off without affecting the operation of the device.
| »
Fluke 561 HVACPro Multipurpose Thermometer Specifically Designed For HVAC Professionals
Submitted by nestorb on Fri, 2006-10-27 21:16. Fluke 561 HVACPro Multipurpose Thermometer Specifically Designed For HVAC Professionals Combines Infrared and Contact Thermometer in a Single, Easy-to-Use Tool
| »
Portable Thermocouple Temperature Controller - CN-TOT suits automatic control applications.
Submitted by nestorb on Thu, 2006-10-26 17:50. Designed for indoor, general purpose use in controlling temperature of small tanks, drums, pipes, and intermediate bulk containers, CN-TOT is portable, plug and play thermocouple temperature controller. It features on/off controlling, 2°F differential, 8 ft input power cord with standard plug and output repeatability, thermocouple sensor accuracy of ±2.7°F, max exposure temperature of -40 to 160°F, and 15 A capacity.
| »
