Thermostats
Thermostats with 25 a capacity.
Submitted by nestorb on Fri, 2006-12-01 13:27. The units are suitable for humid environments in the HVAC and refrigeration industries – particularly for freezer, refrigerator, and air conditioner applications.
Heated Enclosures protect wide range of devices.
Submitted by nestorb on Tue, 2006-11-07 11:07. New STI Heated Polycarbonate Enclosures under Development
Floor heating with home automation systems
Submitted by nestorb on Fri, 2006-11-03 16:35. The Comfort Heat ENT thermostat is din rail mounted and interfaces with your home automation system, allowing you to adjust temperature and set back temperature with your existing sequence. Program your floor heating to be warm when you’re home and, as you walk out the door, have your floor temperature drop to a lower setting, becoming cost effective...
Temperature controller
Submitted by nestorb on Wed, 2006-11-01 16:29. The instrument is factory configured with two inputs chosen in the field for two diode sensors, two resistance temperature detectors, or one of each. Thermocouple inputs can be substituted for one or both of the sensors by request on order. Two independent PID (proportional-integral-derivative) control loops with...
Hydronic vs electric floor heating
Submitted by nestorb on Sun, 2006-10-29 16:35. With medium to small areas (e.g. family room/bathrooms) the best option is electric. Electric floor heating eliminates high set up expenses, can be used in renovations and has a quick response time, reaching temperature in the first 60-90min...
Portable Thermocouple Temperature Controller - CN-TOT suits automatic control applications.
Submitted by nestorb on Thu, 2006-10-26 17:50. Designed for indoor, general purpose use in controlling temperature of small tanks, drums, pipes, and intermediate bulk containers, CN-TOT is portable, plug and play thermocouple temperature controller. It features on/off controlling, 2°F differential, 8 ft input power cord with standard plug and output repeatability, thermocouple sensor accuracy of ±2.7°F, max exposure temperature of -40 to 160°F, and 15 A capacity.
New Thermostat Available
Submitted by nestorb on Mon, 2006-10-23 16:37. The thermostat can be programmed with a 7 day, 24 hour time clock. You can choose the day and the hour the floor heating turns off and on. This means that when you are not at home, you are not wasting electricity on your floor heating and your floors are warm when you need them to be...
Proliphix Introduces TM220 and TM250 Thermal Management Internet-Enabled Network Thermostats with Independent Sensor Monitoring
Submitted by nestorb on Tue, 2006-10-17 22:29. The TM Series Thermostats are ideal for light commercial facilities that require inexpensive remote HVAC management and refrigeration monitoring, such as quick service restaurants, casual dining establishments and convenience stores where product integrity and safety are crucial.
Selco Products Introduces 3/4" Disc Thermostats for Home Appliance, HVAC, and Vending Applications
Submitted by nestorb on Tue, 2006-10-17 14:46. The T10/T11 thermostats feature manual reset with a 25-amp capacity, operating temperature range of 104 to 350 degrees F. and UL approval. The switch mechanism is actuated by a temperature sensitive, snap-action bimetal disc. which may be enclosed or exposed, depending on design requirements...
Power supplies stretched to the breaking point
Submitted by nestorb on Sun, 2006-07-23 00:52. The ISO also asked residents to conserve energy by not using major appliances during peak hours, setting thermostats to 82 degrees or higher and turning them off when not at home...
