Encoder
Economical Encoders Ideal for Space Restricted Industrial Applications
Submitted by nestorb on Wed, 2007-01-24 08:14. The TVI40N utilizes the latest Opto-ASIC technology to provide fast, reliable, high-resolution operation. It is further equipped with a loadable metal disk that enables the encoder to accept heavy loads without compromising performance...
Encoders and Resolvers are offered with heavy-duty shaft.
Submitted by nestorb on Thu, 2006-12-14 13:27. DC25 DuraCoder and H25 resolver transducer are available with stainless steel front shaft option that measures 5/8 in. in diameter and carries 100 lb radial and 50 lb axial load ratings...
Motion Card provides multi-axis control.
Submitted by nestorb on Thu, 2006-12-14 00:22. Prodigy(TM)-PCI Motion Card provides servo loop rates up to 50 µsec/axis, quadrature encoder input rate of 8 Mcount/sec, high-speed motion trace for servo tuning diagnostics with 40 KB onboard dual-port memory, and pulse and direction output up to 5 Mpulses/sec...
Incremental Encoders Designed for Mechanical Drive and Lift Engineering Applications
Submitted by nestorb on Sun, 2006-12-03 08:05. The RHI90N features a nominal outer dimension of 90mm, with variable hollow shaft diameters available from 16mm - 45mm. A hollow shaft configuration enables the encoder to be directly couple to the application's shaft without additional couplings...
Rotary Position Sensor
Submitted by nestorb on Fri, 2006-12-01 23:27. The sealed PC board construction meets IP 67 standards. Typical applications include agricultural, industrial, heavy truck, heavy off-road, RV, and golf cart vehicles...
Interface Position Sensor
Submitted by nestorb on Fri, 2006-12-01 23:27. The R-Series includes options for synchronized 7,500 kHz update rates and position accuracy as low as 2 microns. Proprietary synchronization technology is designed to provide accurate position output while minimizing inherent system-related delays to produce smooth, precise velocity loop control...
Digital Angular Position Sensor
Submitted by nestorb on Fri, 2006-12-01 17:23. The position sensor incorporates the manufacturer’s broadband energy transfer technology, which is said to provide accurate position and speed information. Engineers can program the sensors during installation to set zero degree positions...
Non-Contacting Rotary Sensor
Submitted by nestorb on Fri, 2006-12-01 13:27. The RFC series has unlimited mechanical life because it is a rotary sensor with no moving parts. There are two assemblies the sensor with integrated micro-processor and associated electronics, and a separate magnet embedded in a shaft adapter...
Heavy Duty Shaft Increases Radial Load Rating by 250% for AMCI Encoders & Resolvers
Submitted by nestorb on Thu, 2006-11-30 08:08. This rugged shaft option now carries a 100 lb radial load and a 50 lb axial load rating, delivering a 250% increase over the current radial load rating of 40lbs. AMCI engineered the 5/8" front shaft option for applications that demand a higher radial load rating; for example, when pulleys, chains and gears are mounted for use under tension.
Webinar Explains Smoother Speed Control Using the New BiSS Serial Protocol
Submitted by nestorb on Tue, 2006-11-28 11:07. The webinar covers everything that engineers need to know in order to integrate BiSS-based encoders with motors and drives, including wiring, clocking, diagnostics, registers, and comparison to other leading protocols. There is no cost for the webinar but online registration is required at www.feedbackdevices.com/biss
