ARI-Armaturen has announced the new ARI-Stevi BBD - a bottom blowdown valve with pneumatic actuator that effectively removes impurities to maintain optimum steam quality and boiler operation
Valves
Increase boiler house efficiency and reduce costs
Submitted by nestorb on Fri, 2007-03-23 23:08.Parker highlights high-integrity Manifolds.
Submitted by nestorb on Fri, 2006-12-22 20:09. The first range - the H Series - provides a wide choice of three- and five-way manifolds for pressure and flow instrumentation and features integral pre-assembled connections for compression tube fittings. Known as PTFree Connect, this innovation eliminates taper thread interconnections, and with it any need for PTFE tape or anaerobic sealant - a cause of problems in the field.
New Large Diameter Ball Valve Features Sophisticated Actuation And Feedback Capabilities
Submitted by nestorb on Wed, 2006-12-06 11:50. The new valve is suitable for use across a broad spectrum of applications including industrial water treatment, swimming pools, aquariums, water parks, waste water technology, potable water treatment, chemical distribution, electroplating and power plants.
Parker Instrumentation shows space- and cost-saving solutions for process analysis
Submitted by nestorb on Tue, 2006-12-05 09:08. IntraFlow surface-mounting fittings dramatically reduce the amount of space required, minimising the volume of sample flow paths, and speeding construction and reducing cost of ownership. Substrate fittings plug together in seconds using novel slip-fit connectors. No welding is required to build a system...
Advanced check valves reduce costly maintenance on dual-fuel turbines
Submitted by nestorb on Sat, 2006-12-02 09:11. Design features guard against common failure modes in dual fuel applications
Vacuum isolation valves
Submitted by nestorb on Tue, 2006-11-07 06:29. The JV series offers a unique manual actuator for coarse throttling, which allows partial opening by specified and repeatable intervals. Also available are pneumatic operators with an optional air solenoid kit and electromagnetic actuators for systems that do not have compressed air sources...
Modular high pressure distribution Manifold can be configured for any number of outlets.
Submitted by nestorb on Sun, 2006-11-05 20:09. The manifold is based on a field-proven, high-integrity 3/8-inch ball valve design. Conforming to ANSI/ASME ratings, it features a 4:1 pressure boundary safety factor, to deliver reliable ANSI Class 1500 operation. It also meets the fire-safe requirements of API 607 and BS6755 Part 2...
Valve and Actuators have no exposed moving parts.
Submitted by nestorb on Tue, 2006-10-31 11:14. Combining pneumatic actuator and on-off control valve, Series CVA Compact Valve and Actuators eliminate packing glands, actuators, and mounting kits. Stroke is linear and parallel to flow, reducing required force to close or open valve, and internal waterway design allows optimum flow characteristics. Pneumatic actuated valve is available in double acting with 2 supply ports (1/8 in. NPT), spring return normally closed, and normally open models.
New stainless steel flanged ball valves
Submitted by nestorb on Thu, 2006-10-26 18:52. F91 valves are available in sizes 0.5" to 6.0" in manual and automated versions, with electric or pneumatic actuators, spring-return or double-acting configuration. The investment-cast, one-piece body can be 316SS or WCB with a stainless steel ball and blowout proof stem as standard...
